- Home
- Obstructions
Starlink obstructions: find a clear view
Starlink needs a clear view of a moving swath of sky โ and even a single branch or roofline clipping that view causes brief drops that read as lag. Here is how to find the obstruction, check it in the app, and clear it for good.
Published Oct 30, 2026 ยท Updated Nov 6, 2026
Why obstructions matter
Unlike an old satellite dish that locks onto one fixed point, a Starlink dish tracks satellites as they race across the sky, so it needs a clear view of a wide, moving swath overhead โ not just one direction. When something crosses that view, even briefly, the dish loses the satellite it was using and has to wait for the next one, which shows up as a short drop. Because the satellites are constantly moving, an obstruction that only blocks a sliver of sky still clips the link every time a satellite passes behind it. The result is not usually a total outage โ it is brief, repeated drops and packet loss that feel like lag, buffering or "slow" internet. Small blockages matter more than people expect for exactly this reason.
Check obstructions in the app
The Starlink app is the fastest way to see your sky view. Open the obstruction check / Visibility tool and run the AR scan โ you pan your phone across the sky and the app maps which areas are blocked and which are clear. It also keeps a live obstruction map and logs how much connection time you have lost to blockages over recent hours, so you can tell a real obstruction problem from an occasional blip. Run the scan from the exact spot and height where the dish sits; a scan from a different place or lower down will not reflect the dish's real view. When the map shows red, that is where a satellite gets clipped as it passes.
Symptom, cause and fix at a glance
Match what you are seeing to the likely obstruction cause and the move that fixes it.
| Symptom | Likely cause | Fix |
|---|---|---|
| Brief drops every few minutes | A tree or object clipping the sky view | Run the AR scan; raise or relocate the dish |
| Got worse in spring/summer | Trees leafed out over the view | Raise above the canopy or move clear of trees |
| Red near the horizon in the app | Roofline, fence or low obstacle | Lift the dish on a pole or roof mount |
| Drops in one direction only | A single building or tall structure | Shift placement so it no longer crosses the view |
| Fine on a stand, bad on the roof (or vice versa) | Height changed what the dish can see | Re-scan at the final spot; pick the clearer one |
| Lag but the app shows no obstruction | Not obstructions โ congestion or Wi-Fi | See slow-speeds and troubleshooting guides |
How much sky, and in which direction
The dish favors a broad cone of open sky overhead, widest toward the slice of sky where it finds the most satellites for your location โ the app's obstruction tool shows you exactly where that is. You do not need a perfect 360-degree horizon, but the more unobstructed sky you give it, the fewer drops you will see. The field of view the dish needs has eased over time as the constellation has grown denser, so older advice tends to overstate how much clearance is required. Rather than chase a number, let the app's scan be your guide: aim for a placement where the map comes back mostly green in the direction it cares about.
Raising the dish
Because most obstructions sit low โ rooflines, fences, nearby trees โ height is usually the single most effective fix. Lifting the dish on a pole, mast or roof mount can raise its sightline above the obstacle in one move, clearing drops that no amount of re-aiming would solve. A peak-of-roof or dedicated pole mount clear of the house is often the cleanest answer for a fixed home. Mind the practicalities before you go high: a secure mount rated for wind, enough cable length to reach the router, and safe weather-sealed routing. Our accessories and mounts guide covers pole, roof and mast options that work well.
Relocating vs trimming trees
When a tree is the problem, you have two choices: clear the tree or move the dish. Trimming can work if a single branch is the culprit and it is yours to cut โ but trees grow back and seasons change, so it is often a recurring chore. Relocating or raising the dish above or away from the canopy tends to be the more durable fix. Weigh the effort honestly: a one-time pole mount that clears the whole treeline usually beats trimming the same branches every year. Never cut near power lines or trees that are not yours, and when in doubt, move the dish instead.
Temporary vs permanent placement
The ground stand in the box is great for testing โ set it in a candidate spot, run the obstruction check, and see how the view looks before committing. But a stand on the ground usually sits too low to clear obstructions and is not meant as a permanent home-install solution. Once you have found a clear spot with the app, move to a secure, permanent mount at the right height. For travel and RV use the trade-off flips โ quick, temporary placement is the point โ but for a fixed home, test temporarily, then mount properly.
Reading the obstruction stats
The app does not just show a map โ it reports how much time you have lost to obstructions over a recent window. Use that number to judge whether a placement is good enough: a tiny fraction of lost time may be fine, while repeated losses point to a view you still need to clear. After any change โ raising the dish, moving it, trimming a branch โ let it run and re-check the stats to confirm the fix actually helped. This turns "I think it is better" into a measurement you can trust.
When it ties into slow speeds and dropouts
Obstructions are one of the top causes of what people report as slow or laggy Starlink, but they are not the only one โ congestion and Wi-Fi coverage cause similar-feeling problems with completely different fixes. If the app's obstruction check comes back clean but you still have trouble, the cause is elsewhere: see why Starlink is slow to tell obstructions apart from peak-hour congestion, and the full troubleshooting guide for a step-by-step diagnosis. For first-time placement and aiming, start with the setup guide.
Frequently asked questions
How much clear sky does Starlink need? +
The dish tracks satellites across a wide, moving patch of sky rather than aiming at one fixed point, so it wants a broad, mostly unobstructed view overhead โ roughly a cone opening up and out from the dish, widest toward the part of the sky it favors. The exact field of view depends on the dish model and your location, and it has eased over the years as the constellation has grown. There is no single magic number, but the practical rule is simple: the more open sky, the fewer drops. Use the app's obstruction check to see your actual field of view.
Will trees block Starlink? +
Yes โ trees are the most common obstruction. Even bare branches scatter and block the signal, and a tree that is clear in winter can cause drops once it leafs out in spring. A single branch crossing the dish's sky view can be enough to produce brief, repeated outages. The fix is usually to raise the dish above the canopy or relocate it to a spot the trees do not cross, rather than relying on it to "see through" them.
How do I check for obstructions? +
Open the Starlink app and use the obstruction check / Visibility tool, which includes an AR scan: you pan your phone around the sky and it maps what is blocked. The app also tracks a live obstruction map and logs how much time you have lost to blockages. Run it from the exact spot where the dish will sit, at the height it will sit, so the scan reflects the real view. Red areas mark obstructions you need to clear or aim around.
Does raising the dish help? +
Often dramatically. Most obstructions are low on the horizon โ rooflines, fences, nearby trees โ so lifting the dish on a pole, mast or roof mount can clear them in one move by lifting its sightline above the obstacle. Height is usually the single most effective fix. See our accessories and mounts guide for pole, roof and mast options. Mount it securely and mind cable length and weather before going high.
What do obstruction drops feel like? +
Short, repeating interruptions rather than a steady slowdown: a video call freezes for a second or two every few minutes, a stream buffers briefly, an online game spikes in latency and recovers. Because each drop is brief, people often report it as "slow" or "laggy" Starlink when it is really packet loss from a clipped sky view. The app's obstruction stats confirm it โ see why Starlink is slow to tell obstructions apart from congestion.
Can I just trim trees instead of moving the dish? +
Sometimes, if a single branch is the culprit and it is yours to trim. But trees grow back and seasons change, so trimming is often a temporary fix. Raising or relocating the dish above the problem is usually more durable. Weigh the effort: a one-time pole mount that clears the whole canopy often beats repeated trimming โ and never trim near power lines or trees that are not yours.
Where should I place the dish for the clearest view? +
The highest, most open spot with sky visible in all directions and especially toward the part of the sky the app favors for your location โ frequently a roof peak, a pole clear of the house, or an open patch of yard away from trees and buildings. Use the app's obstruction check at the candidate spot before you commit, and prefer a permanent, secure mount over a temporary ground stand for a fixed home. Our setup guide covers aiming and placement step by step.
Does the dish aim itself? +
The powered dishes motorize to find their best orientation on their own, so you do not hand-aim them like an old satellite dish โ your job is to give them a clear patch of sky and a stable mount. Smaller and manual models rely more on you pointing them at open sky. Either way, placement and a clear view matter far more than fine aiming; let the dish handle orientation and focus on clearing obstructions. See the setup guide for specifics.
New to Starlink? Grab a free month.
New customers get one month of service free through our referral โ applied to the second month.
See the Free-Month Offer โWhen you choose local, you're supporting local
Support your local internet provider whenever you can, and save Starlink for where it's genuinely the only reliable option. Your money stays in your community โ funding local jobs, local businesses, and the people who live and work in the same places they serve. Local and regional providers also usually beat satellite on latency and support where they reach.
Check who already covers your address before you buy a dish: the WISPA “Find a WISP” directory, the FCC Broadband Map, or a quick search for your county + “internet providers.” In our areas, On-Ramp Indiana (Indiana) and ETHX (Southwest Florida) offer local fiber and fixed-wireless: