- Home
- Troubleshooting
Starlink not working? fix offline, obstructions & reboots
Offline, obstructed, overheating, boot-looping, or crawling at peak hour? This is the no-nonsense troubleshooting hub. Start with the 60-second triage, find your symptom in the table, then jump to the real fix.
Published Sep 22, 2026 ยท Updated Nov 6, 2026
Symptom โ cause โ fix (quick reference)
Find your symptom, get the likely cause, then jump to the section below for the full fix.
| Symptom | Likely cause | Fix |
|---|---|---|
| Offline / no internet | Power, cable, outage, or suspended account | Reboot, reseat cable, check outage map & billing |
| Obstructed / drops every few min | Trees, roofline or overhang in the view | Run obstruction check; relocate or pole-mount higher |
| Overheating / thermal shutdown | Router/supply too hot, no airflow | Shade, ventilate, keep out of sealed cabinets |
| Won't power on / boot loop | Weak supply or brownout (looks like dead HW) | Try known-good outlet, add a UPS, then replace |
| Slow / laggy at peak | Evening congestion; upload is the weak point | Understand peak hours & pricing; weigh a WISP |
| WiFi weak but dish online | Router/coverage issue, not the dish | Mesh, reposition, or bypass mode + own router |
| Video calls drop | Latency jitter on handoff + CGNAT | Go wired; use CGNAT-friendly VoIP |
Offline / "no internet"
"Offline" covers two very different situations, and the Starlink app tells them apart. If the app can reach the dish but says it's offline, it's usually a satellite acquisition hiccup, a brief outage, or a suspended account โ reboot, check the outage map, and confirm billing. If the app can't reach the dish at all, you've got a power or cable fault: reseat the cable at both ends, inspect for bent pins or water, and try a different outlet. On a flaky grid, a dish that "goes offline" several times a day is often really a power problem in disguise. Also sanity-check that service hasn't lapsed โ see how billing works.
Obstructions (trees, roofline, overhangs)
If your connection drops for a few seconds every few minutes, suspect obstructions. The dish needs a clear view of a wide swath of sky, and anything clipping that view โ a branch, a chimney, the edge of a roof โ causes short, repeating drops that no reboot will fix. Open the app's obstruction check / Visibility and let it map your sky; red areas are the problem. The cure is a clearer location or more height: move the dish away from the obstruction, or get it up on a pole or roof mount so it clears the treeline. A few feet of extra height often eliminates the drops entirely.
Overheating / thermal shutdown
On hot days โ especially a dark roof in summer โ Starlink can throttle speeds or shut down outright to protect itself. The dish is built to take sun, but the router and power supply indoors are the usual overheating culprits. Keep them out of sealed cabinets, closets, or stacked under other gear; give them a few inches of clearance and some airflow. In hot climates, position the router in the coolest room you can, out of direct sunlight through a window, and make sure nothing is sitting on top of it. If the app reports thermal events, fixing airflow almost always clears them.
Won't power on / boot loop
This is the symptom that fools people most. A dish that won't boot, or that cycles endlessly through startup, looks like dead hardware โ but very often it's power. A sagging power supply, a worn cable, or a brownout-prone outlet starves the dish mid-boot. Before you do anything drastic, plug it into a different, known-good outlet on a solid circuit. If your grid flickers or browns out, that's exactly what a UPS is for โ it gives the dish clean, steady power and ends the reboot loop. Only after it still refuses to boot on clean, stable power should you treat it as failed hardware and start a replacement claim.
Slow speeds / congestion
If Starlink is fast most of the day but crawls in the evening, that's peak-hour congestion, not a fault. Capacity is shared per cell, so the busy window (roughly 6โ11pm) is where speeds dip โ and the first thing to suffer is usually upload, which is Starlink's weak point at around ~15 Mbps up even when download looks healthy. There's no trick to beat congestion itself, but it's worth understanding how dynamic pricing and congestion interact in busy areas, and whether a local WISP would give you steadier speeds (and better upload) if one is available where you are.
WiFi / router problems
If the app shows the dish online and healthy but WiFi is weak in parts of the house, the problem is your router and coverage, not Starlink. Reposition the router higher and more central, add mesh nodes for distant rooms, or โ for the most control โ put the Starlink router in bypass mode and run your own router/mesh system. Our router and mesh picks cover what works well behind a Starlink.
Dropped video calls / VoIP
Calls that cut out mid-sentence usually come down to two things on Starlink: brief latency jitter (especially the instant the dish hands off between satellites) and CGNAT, the carrier-grade NAT Starlink uses, which can interfere with some VoIP configurations. A wired connection to the device making calls helps with jitter, and choosing a VoIP service that tolerates CGNAT avoids the registration and audio problems. See our guide to VoIP and a landline over Starlink for setups that hold up.
When to request a replacement
Exhaust the cheap fixes first โ power, cable, obstructions, overheating, and WiFi are behind the vast majority of problems. But if the dish won't boot on a known-good outlet, shows a persistent hardware fault in the app, or has visible physical damage, it's time for a warranty or replacement claim. Our replacement and warranty guide explains what Starlink covers, how long it typically takes, and how to file so you're not left offline any longer than necessary.
Frequently asked questions
Why is my Starlink offline / showing no internet? +
Start with the Starlink app: it tells you whether the dish itself is online, obstructed, or in a known outage. If the app says "offline," reboot (unplug 30 seconds, or app โ Settings โ Reboot), reseat the cable at both ends, and confirm the account is active and paid. If the app can't even reach the dish, it's usually power or cable โ see rule out power first.
My Starlink keeps dropping every few minutes โ what's wrong? +
That pattern is almost always obstructions. Run the app's obstruction check (Visibility / Statistics) and watch for red. Trees, a roofline or an overhang clipping the field of view will cause short, repeating drops. The fix is a clearer spot or a taller pole mount, not a reboot.
Why does Starlink reboot or shut off on hot days? +
It's thermal shutdown. The dish and router throttle or power down to protect themselves when they get too hot โ common on dark rooftops in summer. Improve airflow, give the router some breathing room (not in a sealed cabinet), and shade the power supply and router. The dish itself is built for sun, but the electronics indoors still need to stay cool.
My Starlink won't power on or keeps boot-looping. Is the hardware dead? +
Not necessarily โ and this is the big one. A weak or sagging power supply, or a brownout-prone outlet, looks exactly like dead hardware: no lights, or an endless reboot loop. Rule out power before you RMA anything. Try a different, known-good outlet, and consider a UPS if your grid is flaky. If it still won't boot on clean power, then it's time for a replacement.
Why is Starlink so slow at night / in the evening? +
Peak-hour congestion. Starlink shares capacity by cell, so evenings (roughly 6โ11pm) are the busy window and speeds dip. Upload is the weak point โ often only ~15 Mbps up even when download is fine. There's no magic fix for congestion, but it's worth understanding how pricing and congestion interact, and whether a local WISP would serve you better.
My dish is online but WiFi is weak in parts of the house. How do I fix it? +
That's a router/WiFi problem, not a Starlink problem โ the dish is doing its job. Add mesh nodes, reposition the router higher and more central, or put the Starlink router in bypass mode and run your own router/mesh. See our router and mesh picks.
Why do my video calls and VoIP calls drop on Starlink? +
Two culprits: brief latency jitter (especially the moment the dish hands off between satellites) and CGNAT, which can interfere with some VoIP setups. For calling, a wired connection and a VoIP service that tolerates CGNAT help a lot โ see VoIP and landline over Starlink.
When should I just request a replacement dish? +
After you've ruled out power, cable, obstructions and overheating. If the dish won't boot on a known-good outlet, shows persistent hardware faults in the app, or has visible physical damage, start a warranty/replacement claim. Our replacement and warranty guide walks through what Starlink covers and how to file.
New to Starlink? Grab a free month.
New customers get one month of service free through our referral โ applied to the second month.
See the Free-Month Offer โWhen you choose local, you're supporting local
Support your local internet provider whenever you can, and save Starlink for where it's genuinely the only reliable option. Your money stays in your community โ funding local jobs, local businesses, and the people who live and work in the same places they serve. Local and regional providers also usually beat satellite on latency and support where they reach.
Check who already covers your address before you buy a dish: the WISPA “Find a WISP” directory, the FCC Broadband Map, or a quick search for your county + “internet providers.” In our areas, On-Ramp Indiana (Indiana) and ETHX (Southwest Florida) offer local fiber and fixed-wireless: