- Home
- Starlink & Weather
Starlink in bad weather โ rain, snow, heat & cold
Starlink holds up well in weather, with a few honest caveats. Light rain and snow barely register; heavy storms and snow-covered dishes can cause brief drops; and the two things people underestimate are the heater's power appetite in winter and overheating in summer sun. Here's what to expect in each condition.
Published Oct 12, 2026 ยท Updated Nov 6, 2026
Rain, snow & clouds
Most weather passes right through the signal. Light to moderate rain, snow and overcast skies have little real effect on Starlink. Where you'll notice it is in the extremes: a very heavy downpour can scatter the signal enough to slow things down or cause a short dropout ("rain fade"), and a dish caked in wet snow can block itself until it clears. The good news is the dish fights the snow for you โ its built-in snow-melt heater warms the panel so snow slides or melts off instead of piling up. That heater is the hero of winter, with one cost: it draws noticeably more power while it runs (the heater surge is covered in our Gen 3 power draw guide).
Heat โ the summer problem people miss
The dish is rated for outdoor heat, but it isn't immune: in extreme heat or direct sun with poor airflow, it can thermally throttle or shut down until it cools back off. This is a much bigger deal for a Starlink Mini mounted inside under a skylight or dome โ the glass turns the space into a small greenhouse and the Mini bakes. The fix is airflow: never box the unit in, don't close an insulated shade over it in the sun, and give it open air underneath. We cover this in detail in the skylight mount heat section.
Cold โ it works, but it costs watts
Starlink runs fine in cold weather; the hardware is built for it. The thing to plan for isn't the cold itself โ it's that the heater runs more in cold, wet and snowy conditions, and that extra draw can nearly double the dish's power use versus a mild day. If you're off-grid or on backup power, size your battery and solar for the heater cycles, not the average day, or you'll brown out exactly when a storm hits. See the off-grid power guide for sizing.
Wind & storms
Wind doesn't block the signal, but it causes two indirect problems: it can shift a poorly secured dish off its aim, and it can blow debris, branches or snow into the dish's view, causing dropouts. Mount the dish solidly on a stable pole or base. Storms also bring power flicker โ brief grid dips that reboot the dish and router right when you want them up. A small UPS on the Starlink gear rides through those flickers; see our UPS guide.
Weather at a glance
| Condition | Effect | What to do |
|---|---|---|
| Light rain / snow / clouds | Little to no impact | Nothing โ carry on |
| Very heavy rain | Brief slowdown / rain-fade drop | Keep a clear sky view; it passes |
| Heavy snow on dish | Can block until cleared | Heater melts it; brush off if caked |
| Extreme heat / direct sun | May throttle or shut down | Give it airflow; don't trap under glass |
| Cold weather | Works, but heater draws more power | Size battery/solar for the surge |
| High wind / storms | Mount shift, debris, power flicker | Secure the mount; add a UPS |
Bottom line
For a satellite service, Starlink is impressively weather-tough โ far better than the old rain-fade-prone GEO systems. Plan around three things and you'll rarely notice the weather: keep a clear view of the sky so storms don't compound with obstructions, size your power for the winter heater if you're off-grid, and manage heat in summer so the dish doesn't cook itself. If a drop ever outlasts the weather, start with our troubleshooting guide.
Frequently asked questions
Does Starlink work in the rain and snow? +
Yes, most of the time. Light to moderate rain, snow and cloud cover are fine โ the signal passes through them. Only very heavy downpours, or a dish buried under wet snow, cause brief slowdowns or drops ("rain fade"). The dish also has a built-in heater that melts snow off the panel so it keeps working through a storm.
Does weather slow Starlink down? +
It can, briefly. Very heavy rain or a thick snow build-up on the dish scatters the signal and you may see slower speeds or short dropouts until it passes or the snow melts off. Everyday rain, light snow and overcast skies usually have little noticeable effect.
Does the Starlink dish melt snow? +
Yes. The dish has a built-in snow-melt heater that warms the panel to keep it clear, so snow slides or melts off instead of blocking the signal. The trade-off is power: the heater draws significantly more watts while it runs, which matters on battery or solar โ see our Gen 3 power draw guide.
Can Starlink overheat? +
Yes. The dish is rated for outdoor heat, but in extreme heat or direct sun with poor airflow it can thermally throttle or shut down until it cools. This bites hardest with a Mini mounted inside under a skylight or dome, which acts like a little greenhouse. Give it airflow and don't trap it behind glass in full sun โ more in our skylight mount heat section.
Does cold weather increase Starlink's power use? +
Yes. In cold, wet or snowy conditions the snow-melt heater runs more often, and that can nearly double the dish's power draw versus a mild day. If you're off-grid, size your battery and solar for those heater cycles, not the average โ see the off-grid power guide.
Will heavy rain knock Starlink offline? +
Usually only briefly, during the heaviest part of a storm cell ("rain fade"). As the downpour eases, the connection comes back. A clear, unobstructed view of the sky helps a lot โ obstructions plus heavy rain together are what cause the longest drops.
Does Starlink work in extreme cold? +
Yes. The hardware operates in cold temperatures, and the heater keeps snow and ice off the panel. The thing to plan for in cold climates isn't failure โ it's the extra power the heater uses keeping the dish clear.
What about wind and storms? +
High wind won't block the signal, but it can shift a poorly secured dish or blow debris into its view, causing dropouts. Mount it solidly. For the power flickers that come with storms, a small UPS keeps the dish and router running through brief outages โ see our UPS guide.
New to Starlink? Grab a free month.
New customers get one month of service free through our referral โ applied to the second month.
See the Free-Month Offer โWhen you choose local, you're supporting local
Support your local internet provider whenever you can, and save Starlink for where it's genuinely the only reliable option. Your money stays in your community โ funding local jobs, local businesses, and the people who live and work in the same places they serve. Local and regional providers also usually beat satellite on latency and support where they reach.
Check who already covers your address before you buy a dish: the WISPA “Find a WISP” directory, the FCC Broadband Map, or a quick search for your county + “internet providers.” In our areas, On-Ramp Indiana (Indiana) and ETHX (Southwest Florida) offer local fiber and fixed-wireless: