- Home
- Setup Guide
Starlink setup guide: install, aim & get online
Starlink is built to self-install, and most people are online in well under an hour. Here is the whole process โ from opening the box to verifying speeds โ with the one step that saves the most grief: checking for obstructions before you mount anything.
Published Sep 15, 2026 ยท Updated Nov 4, 2026
Step by step
The whole process in order. Steps 1 through 4 get you connected; the rest are about doing it well and permanently.
| # | Step | What to do |
|---|---|---|
| 1 | Unbox the kit | Lay out the dish, router, cable, power supply and base |
| 2 | Check obstructions in the app | Scan the sky with the AR tool from your chosen spot |
| 3 | Set up & power on | Use the stand, connect cable to router, plug in |
| 4 | Activate & connect | Activate the account, join the Wi-Fi, wait for first link |
| 5 | Verify & mount | Confirm speeds, then move to a permanent mount |
1. Unbox and check the kit
A standard Starlink kit includes the dish (antenna), the Wi-Fi router, a cable that connects the dish to the router, a power supply, and a base or stand for a temporary ground setup. Contents vary a little by hardware version, so glance at the quick-start card to confirm what came with yours. Do not commit to a permanent install yet โ you will test first.
2. Check for obstructions โ before you mount
This is the step that saves the most grief. In the Starlink app there is an obstruction check that uses your phone's camera in an augmented-reality view: you hold it up and sweep the sky, and the app tells you whether that spot has a clear enough field of view. Do this from the exact location you are considering, at the height the dish will actually sit. Even a partial blockage โ a branch, a roofline, a chimney โ causes drops later, so finding a clear spot now is worth the two minutes.
3. Find a clear view of the sky
The dish points and aims itself; your job is to give it open sky. The more unobstructed sky it can see, the better and steadier the connection. In North America the satellites skew toward the north, so a clear northern exposure helps, but it still needs a wide swath overhead โ not a narrow gap between trees. Higher is generally better, which is why a roof edge or a pole often beats ground level. If a ground spot is clear in the app, though, there is no need to go high just for the sake of it.
4. Temporary stand vs permanent mount
Start with the included stand on the ground, a deck, or a railing to prove the location works. Once you are happy with the connection, move to a permanent mount โ a wall, roof, or pole mount gets the dish up and out of the way and clears low obstructions. Pick a mount rated for your dish and your wind exposure, and weatherproof any roof penetration. See our mounts and accessories guide for the options and when each makes sense.
5. Route the cable
The dish-to-router cable needs a path indoors. Many installs run it through an existing gap, a vent, a window-pass cable, or a small drilled hole with a weatherproof entry. Leave a drip loop so water runs off rather than following the cable inside, and avoid sharp kinks or pinching the cable in a window. For RVs and vehicles, cable entry is its own small project โ see our RV cable routing and 12V guide for clean ways in.
6. Power it up (and consider a UPS)
Connect the cable to the router and plug the power supply into a solid outlet. Starlink is sensitive to clean, steady power โ a brownout-prone or flaky outlet can cause reboots that look like a dead dish. If your grid flickers, putting the system on a UPS gives it stable power and prevents those nuisance drops. On first boot the dish will take a few minutes to find satellites and often downloads a firmware update, so give it time.
7. Activate the account (billing starts here)
You activate service in your Starlink account, and billing typically begins at activation โ not when the box arrives โ so you can wait to activate until you are ready to install. Confirm the current terms in your account, since billing and any trial window can change. Our billing guide explains how cycles, pauses and charges work so there are no surprises on the first statement.
8. First connection and verifying speeds
The first link can take a few minutes while the dish acquires satellites and finishes any update. Once it is online, join the Starlink Wi-Fi (the network name and password are on the router or in the app), run a speed test in the app, and check the obstruction stats to make sure your chosen spot really is clear. If speeds look right and the obstruction map is clean, you are done โ commit to the permanent mount if you were testing on the stand.
Frequently asked questions
How long does Starlink take to set up? +
The physical setup is quick โ many people are online in 15 to 30 minutes with a temporary ground stand. Plan for longer if you are drilling a permanent mount or running cable through a wall. After you plug in, the dish needs a few minutes to find satellites and download an update before the first connection settles, so do not worry if it is not instant.
Which direction should Starlink face? +
You generally do not aim it by hand โ the dish motorizes and points itself. What matters is a clear view of the sky. In North America the satellites it talks to are skewed toward the north, so a clear northern exposure helps most, but the dish needs a wide swath of open sky overhead, not just one direction. Use the app's obstruction check to confirm the spot before you mount anything.
Can I install Starlink myself? +
Yes โ Starlink is designed for self-install, and the kit comes with everything for a basic setup including a temporary stand. Most people never need a professional. You may want a pro (or a handy friend) for a roof mount, a tall pole, or running cable neatly through a wall, mainly for the ladder work and the weatherproofing. See mounts and accessories for permanent options.
When does billing start? +
Billing typically begins when you activate the service in your account, not when the box arrives โ so you can receive the kit and wait to activate until you are ready to install. Confirm the current terms in your Starlink account, since billing rules and trial windows change. Our billing guide covers how cycles, pauses and charges work.
What is in the Starlink kit? +
A standard kit includes the dish (antenna), the Starlink Wi-Fi router, a cable connecting the dish to the router, a power supply, and a basic stand or base so you can set it up on the ground to test. Exact contents vary by hardware version โ check the included quick-start card and Starlink.com for your specific kit.
What if Starlink is still offline after setup? +
Give it several minutes first โ the dish needs to acquire satellites and often downloads a firmware update on first boot. If it stays offline, check the app for obstructions, reseat the cable at both ends, confirm the account is activated, and try a reboot. Our troubleshooting guide walks through each cause, and a flaky outlet is a surprisingly common culprit โ see power and a UPS.
Do I need to mount Starlink on the roof right away? +
No. Start with the included stand on the ground or a deck to confirm you get a clear view and a good connection in that spot, then commit to a permanent mount. Testing first saves you from drilling a roof mount in a location that turns out to be obstructed. The app's obstruction check is your friend here.
New to Starlink? Grab a free month.
New customers get one month of service free through our referral โ applied to the second month.
See the Free-Month Offer โWhen you choose local, you're supporting local
Support your local internet provider whenever you can, and save Starlink for where it's genuinely the only reliable option. Your money stays in your community โ funding local jobs, local businesses, and the people who live and work in the same places they serve. Local and regional providers also usually beat satellite on latency and support where they reach.
Check who already covers your address before you buy a dish: the WISPA “Find a WISP” directory, the FCC Broadband Map, or a quick search for your county + “internet providers.” In our areas, On-Ramp Indiana (Indiana) and ETHX (Southwest Florida) offer local fiber and fixed-wireless: